Half-automatic machine to groove board cases and to apply magnets (or metal plates) by hot glue – Board case feeding by hand – 1 to max 6 magnets per side/1 work cycle
Magnet seat milling, glue application, magnet feeding from charger by fully automatic cycle.
Warning: Last items in stock!
Used materials: Grey board with thickness 1,5 mm up to 4 mm
– Magnets with diam. min. 9,5 mm max 15 mm /thickness 1/1,5/2 mm
Board width: min. 180 mm – max. 1550 mm
Production capacity: 14 cycles (with 1 magnet)/minute – 8 cycles (with 2 magnets)/minute
Power required : 5 Kw
Pneumatic consumption: 150 NL/minute (6 bar)
Overall dimensions: L=2500mm W=2500mm H=2100mm